Fire Extinguisher System for 1994 Mercedes-Benz S600

Description: Extinguishing agent nozzle.

Description: Right front.

Description: In engine compartment on right.

Description: Dia., 10mm.

Description: Emergency air system. Fire extinguisher system. Special-purpose vehicle additional functions.

Description: To mount fuel lines. Extinguishing agent line. To rear floor left. Fuel/brake/breather lines to main floor. Scuff protec. For brake line.

Description: Right rear.

Description: Extinguishing agent line.

Description: Fuel line to firewall crossmember. Purge and vent line to longitudinal member. Vent hose to wheel well.

Description: Pressure tank. Fresh air.

Description: Extinguishing agent line.

Description: Left rear.

Description: To hose. For actuator plug. Rear. Line to body-in-white. For hood cable. Fuel line to holder. Hood cable, front. Gas line.

Description: Injector. Nozzle mount.

Description: To shield. 17.5mm. Thermo-valve in liquid tank. 17.5mm. Cover, front left and right. 17.5mm. Hole plug for vacuum pump. 17.5mm. In cover front, before firewall. 17.5mm. At central inside part below windshield. 17.5mm. Filler neck flap hole;on vehicles equipped with central locking mechan. 12 mm. 17.5mm. In its place,you may also use mercedes-benz part no.:. 17.5mm.

Description: Insulating plastic tube purge line. Protective hose. To angle bracket. Guard plate, left front.

Description: Left front.

Description: Accelerator pedal, at front floor.

Description: Left central.

Description: Fastening, temperature switch at rear.

Description: Bracket to c-pillar. Additional pump m6x10. Bracket to support m 6x10. Front axle brake hose. Hook to side panel m 6x10. At steering gear m6 x 10. Horn to bracket m6x10. On upper frame cross member. Charge plunger unit.

Description: Roof mounted operating unit. Fresh air. Left seat belt retractor. Microphone, connector, below instrument panel. Protective tube. Rattle protection. Protection against scoring for plugconnection under covering. Evaporator case. Condensed water drain.

Description: Engine compartment at bottom and rear-end floor. In engine compartment.

Description: INJECTOR. 8X21/10.9
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm.

Description: To reservoir. Gas sensor.

Description: Temperature switch.

Description: Central. Extinguishing agent. Center left and right.

Description: Left rear.

Description: Fastening, temperature switch at center.

Description: Pressure tank. Gas cylinder, emergency fresh-air system.

Description: Extinguishing agent line. To oil cooler. To holder. Heat exchanger to bracket. At bracket. Cooler mount. Oil cooler in right wheelhouse. De-aeration line to expansion tank. Engine oil cooler. Radiator top fastening.

Description: Front and rear.

Description: Control unit.

Description: Rearview mirror to door. M6X16
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Electric sliding/lifting roof. Cross member to inside front panel pillar. Wiper system to cross member. Bracket mounting. Control unit fixture. Befestigung steuergeraetebox. Mounting to body.

Description: LEVER TO CUSHION FRAME 3.5X9.5. 3.5X9.5
Diameter: 3,5mm
Thread code letter: R. ATTACHMENT, GRID. 3.5X9.5
Diameter: 3,5mm
Thread code letter: R. Strut to central pillar,rear left. 3.5x9.5
diameter: 3,5mm
thread code letter: r. LOUDSPEAKER. 3.5X9.5
Diameter: 3,5mm
Thread code letter: R.

Description: Right rear.

Description: In rear end.

Description: Extinguishing agent line. Sensor line mounting.

Description: Extinguishing agent line.

Description: Hose line attachment.